Paper
15 January 2007 In situ observation of UV-laser-induced deposit formation by fluorescence measurement
Author Affiliations +
Abstract
We investigated the formation of UV laser induced deposits on uncoated and coated fused silica optics under vacuum conditions in presence of outgassing materials. As contamination samples epoxy, silicone and polyurethane containing materials were used. To realize low partial pressures of the contaminants in the gas phase they were slightly heated (40°C). The formation of the depositions was monitored in situ and online by detecting the fluorescence emission of the deposits, excited by the UV laser beam. The influence of different optical coatings on the deposit formation was studied. By analysing the surface profiles of the deposits, growth rates were estimated. Time-of-flight secondary ion mass spectroscopy was used for chemical characterization of the deposits.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
H. Schröder, W. Riede, E. Reinhold, D. Wernham, Y. Lien, and H. Kheyrandish "In situ observation of UV-laser-induced deposit formation by fluorescence measurement", Proc. SPIE 6403, Laser-Induced Damage in Optical Materials: 2006, 64031K (15 January 2007); https://doi.org/10.1117/12.695347
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Luminescence

Contamination

Chemical analysis

Polyurethane

Ultraviolet radiation

Silicon

Fluorescence spectroscopy

RELATED CONTENT

Laser-induced contamination on space optics
Proceedings of SPIE (November 28 2011)
Fluorescence monitoring of organic deposits
Proceedings of SPIE (December 20 2007)

Back to Top