Ionic polymer-metal composite actuators employing sulfonated poly (styrene-ethylene-butylene-styrene) as ionic-exchange membranes

Xuan-Lun Wang; Il-Kwon Oh; Jun Lu; Jin-Hun Ju; Sun-Woo Lee

doi:10.1117/12.779343

1 November 2007 Ionic polymer-metal composite actuators employing sulfonated poly (styrene-ethylene-butylene-styrene) as ionic-exchange membranes

Xuan-Lun Wang, Il-Kwon Oh, Jun Lu, Jin-Hun Ju, Sun-Woo Lee

Author Affiliations +

Proceedings Volume 6423, International Conference on Smart Materials and Nanotechnology in Engineering; 64230V (2007) https://doi.org/10.1117/12.779343
Event: International Conference on Smart Materials and Nanotechnology in Engineering, 2007, Harbin, China

Abstract

There is growing interest in biomimetic motions by employing ionic polymer-metal composites (IPMCs) as the candidates for the fabrication of artificial muscle. However, the membrane materials currently used in IPMC actuators have been limited to a few commercially available perfluorinated ionic polymers, such as Nafion, and they suffer from several shortcomings among which their high cost presents a major obstacle for wide application. With excellent proton conductivity and high water uptake capacity, commercially available Sulfonated poly (styrene-ethylene-butylene-styrene) (SEBS) of low cost has been investigated for many years as a fuel cell membrane. Herein, we report the preparation of a novel IPMC actuator based on the sulfonated SEBS (SSEBS) membrane. The platinum electrodes of the SEBS actuators were obtained with electroless plating procedure, and the cation exchange with lithium was performed by soaking the composite membranes into a 1.5N LiCl solution. The surface and cross-sectional morphologies of the SSEBS actuators were observed by using scanning electron microscopy (SEM), which revealed that the platinum layer up to 8µm was deposited on the top and bottom surfaces of the SSEBS membrane. The electromechanical bending responses were investigated under alternating current excitations with various driving frequencies and voltage amplitudes, which showed high electrical strains under sinusoidal signal. The effect of the membrane thickness on the performance of the actuators was also addressed in this presentation. This kind of IPMC has great potentials for the applications in biomimetic sensors and actuators, which can be utilized to mimic the locomotion of fish and insects and can be applied to micro-robots and bio-medical devices as well.

Citation Download Citation

Xuan-Lun Wang, Il-Kwon Oh, Jun Lu, Jin-Hun Ju, and Sun-Woo Lee "Ionic polymer-metal composite actuators employing sulfonated poly (styrene-ethylene-butylene-styrene) as ionic-exchange membranes", Proc. SPIE 6423, International Conference on Smart Materials and Nanotechnology in Engineering, 64230V (1 November 2007); https://doi.org/10.1117/12.779343

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available