1 November 2007 Fabrication and mechanical properties of Sialon-Si2N2O nanocomposite
Author Affiliations +
Proceedings Volume 6423, International Conference on Smart Materials and Nanotechnology in Engineering; 64234W (2007) https://doi.org/10.1117/12.780084
Event: International Conference on Smart Materials and Nanotechnology in Engineering, 2007, Harbin, China
Abstract
Nano-structured Si2N2O-Sialon composites were prepared by liquid phase sintering method with the amorphous nano-sized Si3N4 and nano-sized AlN powders. Nano-sized Al2O3 and Y2O3 powders synthesized by polyacrylamide gel method were introduced as additives. High relative density 98.6% was observed at low sintering temperature of 1600 °C. XRD analysis indicates that the sintered body consisted of Sialon and Si2N2O crystalline phases. SEM and TEM examination confirmed the grain size of sintered body was less than 80nm. The high hardness 22.5GPa and high flexural strength 895MPa were obtained.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Junting Luo, Junting Luo, Qing Zhang, Qing Zhang, Kaifeng Zhang, Kaifeng Zhang, } "Fabrication and mechanical properties of Sialon-Si2N2O nanocomposite", Proc. SPIE 6423, International Conference on Smart Materials and Nanotechnology in Engineering, 64234W (1 November 2007); doi: 10.1117/12.780084; https://doi.org/10.1117/12.780084
PROCEEDINGS
6 PAGES


SHARE
Back to Top