Translator Disclaimer
Paper
14 February 2007 Design and characterization of a rugged and compact setup for widely tunable harmonic generation in the ultraviolet
Author Affiliations +
Abstract
Design and experimental characterization of a nonlinear optical converter module for the generation of widely tunable UV radiation is presented. The module combines units for second, third and fourth harmonic generation of tunable Ti:Sapphire lasers. A modified conversion scheme based on the combination of BIBO and BBO crystals reduces the complexity of our former published UV setup - resulting in a significant increase of performance and long-term stability of the system. Experimental characterization of the former and the improved UV setup are compared. The investigations of the converter module are carried out with a widely tunable Ti:Sapphire laser with nanosecond pulses and a repetition rate of 1 kHz. This laser provides a continuous tuning range of 690 nm to 1010 nm with pulse energies up to 2.0 mJ and a spectral line width of less than 10 GHz resulting in an output power of the converter module of 1000 mW, 400 mW and 200 mW respectively for the second, third and fourth harmonic generation. The new converter module is a decisive step in the development of a hands-off solid-state laser system with a continuous tuning range from the UV to the NIR - 200 nm to 1000 nm.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
B. Jungbluth, M. Vierkoetter, M. Hoefer, J. Loehring, D. Oberbeckmann, and D. Hoffmann "Design and characterization of a rugged and compact setup for widely tunable harmonic generation in the ultraviolet", Proc. SPIE 6455, Nonlinear Frequency Generation and Conversion: Materials, Devices, and Applications VI, 645502 (14 February 2007); https://doi.org/10.1117/12.698623
PROCEEDINGS
10 PAGES


SHARE
Advertisement
Advertisement
Back to Top