13 March 2007 UV-laser ablation of fused silica mediated by solid coating absorption
Author Affiliations +
Proceedings Volume 6458, Photon Processing in Microelectronics and Photonics VI; 64580E (2007); doi: 10.1117/12.701140
Event: Lasers and Applications in Science and Engineering, 2007, San Jose, California, United States
Abstract
Micro patterning of fused silica by laser ablation is very challenging due to the lack of absorption in the whole spectral range from the deep UV to the near IR. Beside vacuum UV lasers emitting at 157 nm or femtosecond lasers inducing multi photon absorption, indirect methods utilizing external absorbers are applied. Established methods like LIBWE and LIPAA are applicable in a backside configuration, i.e. the laser beam has to pass the workpiece before inducing ablation at the backside. This causes restrictions concerning the shape of the workpiece, i.e. generally a flat front surface is necessary. We propose an indirect ablation method that can be applied for both, back side and front side processing. The fused silica substrate to be machined is coated with a UV-absorbing oxide film. This film is irradiated using an excimer laser leading to ablation of the film and, at sufficiently high fluence, to surface ablation of the fused silica substrate. The ablation depth in the silica can be controlled by the fluence in excess to the threshold. The remaining coating in the unexposed areas is removed afterwards by large area irradiation of the whole surface at a fluence above the threshold of film ablation, but below the threshold of substrate ablation.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
J. Ihlemann, "UV-laser ablation of fused silica mediated by solid coating absorption", Proc. SPIE 6458, Photon Processing in Microelectronics and Photonics VI, 64580E (13 March 2007); doi: 10.1117/12.701140; https://doi.org/10.1117/12.701140
PROCEEDINGS
7 PAGES


SHARE
KEYWORDS
Laser ablation

Silica

Coating

Absorption

Pulsed laser operation

Solids

Surface roughness

Back to Top