Translator Disclaimer
20 March 2007 CO2 laser-assisted local deposition of diamond films by combustion-flame method
Author Affiliations +
Abstract
Quality of diamond films is strongly dependent on substrate temperatures, which are usually controlled in a range of 600 - 1100 °C in most experiments. Although many applications have been achieved with these techniques, diamond film growth is still not possible for substrates that cannot endure such high temperatures for long time. In this study, a continue-wave (CW) CO2 laser was used to irradiate the growth area on tungsten carbide (WC) substrates during C2H2/O2 combustion-flame deposition in order to maintain required temperature in the growth area while keep the rest of the substrates at a low temperature. The laser power was adjusted between 200 - 600 W to study the effects of laser irradiation on diamond deposition. Surface morphologies of the deposited films were examined by a scanning electron microscope (SEM). Film structures were characterized by Raman spectroscopy. It was concluded that the CO2 laser irradiation during combustion-flame deposition could raise the temperature at the growth area efficiently. Both laser power and power density have effects on the diamond deposition. Laser irradiation with proper parameters could improve the crystal quality of the diamond films. Based on the experimental results, the CO2 laser-assisted combustion-flame deposition is a promising method for local substrate heating during diamond film growth.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
H. Ling, Y. X. Han, and Y. F. Lu "CO2 laser-assisted local deposition of diamond films by combustion-flame method", Proc. SPIE 6459, Laser-based Micro- and Nanopackaging and Assembly, 64590Y (20 March 2007); https://doi.org/10.1117/12.700724
PROCEEDINGS
7 PAGES


SHARE
Advertisement
Advertisement
Back to Top