Translator Disclaimer
19 January 2007 On the reliability of thermopneumatic actuators with silicon membranes
Author Affiliations +
Abstract
The application of thermopneumatic actuators to microvalves and microfluidic processing systems continues to attract research and development interest. Yet, as with most microvalve and microfluidic work, little information has been reported with respect to the reliability of microfluidic and microflow systems. In this work, therefore, we extend our earlier discussions of factors affecting silicon membrane reliability, to encompass particular effects of thermopneumatic actuators on such membranes. Specifically, we report experiments demonstrating the effect of cavitation in thermopneumatic actuators on silicon membranes. These experiments show that the nature of cavitation, in a hermetic, thermopneumatic actuator cavity which includes a silicon membrane, is to initiate fast transient pressure pulses in the cavity. The membrane moves mechanically in response to these pressure pulses. If the magnitude of these pressure pulses causes the membrane stress to exceed the silicon yield strength, then fracture of the membrane can occur. The work concludes with a conceptual approach to the design of thermopneumatic actuators, to ensure this failure mode does not occur.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Albert K. Henning "On the reliability of thermopneumatic actuators with silicon membranes", Proc. SPIE 6463, Reliability, Packaging, Testing, and Characterization of MEMS/MOEMS VI, 64630K (19 January 2007); https://doi.org/10.1117/12.697818
PROCEEDINGS
12 PAGES


SHARE
Advertisement
Advertisement
Back to Top