22 January 2007 Tunable infrared detector with integrated micromachined Fabry-Perot filter
Author Affiliations +
Abstract
This paper reports design, fabrication and test results of a tunable pyroelectric detector with an integrated micromachined Fabry-Perot (FP) filter for gas analysis in the Mid-Wave Infrared (MWIR). The new approach is based on a bulk micromachined Fabry-Perot interferometer with an air cavity, which is electrostatically tuned. Various types of moveable reflectors and spring configurations have been fabricated to determine the optimum solution with respect to maximum tuning range, low gravity influence on center wavelength and suitable filter bandwidth. Short and long cavity filters were designed for the spectral ranges of 3...4.3 μm and 3.7...5.0 μm respectively. The tunable filter is arranged on top of a current mode pyroelectric detector with a flat spectral response. It could be shown that the main challenge is to achieve a high finesse in spite of non-perfect parallelism, mirror curvature and additional phase shift caused by the Bragg reflectors.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Norbert Neumann, Martin Ebermann, Karla Hiller, and Steffen Kurth "Tunable infrared detector with integrated micromachined Fabry-Perot filter", Proc. SPIE 6466, MOEMS and Miniaturized Systems VI, 646606 (22 January 2007); doi: 10.1117/12.698871; https://doi.org/10.1117/12.698871
PROCEEDINGS
12 PAGES


SHARE
Advertisement
Advertisement
Back to Top