Paper
13 February 2007 Dicing of high-power white LEDs in heat sinks with the water jet-guided laser
Tuan Anh Mai, Roy Housh, Arnaud Brulé, Bernold Richerzhagen
Author Affiliations +
Abstract
High-brightness LEDs are compound semiconductor devices and distinguish themselves from conventional LEDs by their exceptional luminosity. Today they are increasingly used as light sources, replacing conventional incandescent and fluorescent lamp technologies. HB LEDs are difficult to manufacture, as they must be grown by sophisticated epitaxial growth techniques such as MOCVD. They are packaged like power semiconductors, using surface mount technology and thermal pads. After having been successfully applied to GaN scribing for side-emitting LEDs, the Laser MicroJet(R) is used today for cutting heat sinks of HB white LEDs. Due to the high-emitted light power, the generated heat must be dissipated through a heat sink. Materials typically employed are metals with high heat conductivity, notably CuW and molybdenum. Applying the Laser MicroJet(R) the achieved cutting quality in these metals is outstanding - smooth edges, no contamination, no burrs, no heat damage, no warping - all this at high speed.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Tuan Anh Mai, Roy Housh, Arnaud Brulé, and Bernold Richerzhagen "Dicing of high-power white LEDs in heat sinks with the water jet-guided laser", Proc. SPIE 6486, Light-Emitting Diodes: Research, Manufacturing, and Applications XI, 64860A (13 February 2007); https://doi.org/10.1117/12.701059
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Light emitting diodes

Semiconducting wafers

Laser cutting

Molybdenum

Laser applications

Chemical vapor deposition

Manufacturing

Back to Top