29 January 2007 Data acquiring support system using recommendation degree map for 3D outdoor modeling
Author Affiliations +
Abstract
We propose a support system of range data acquisition by a laser rangefinder for wide area outdoor modeling in order to reduce un-observed portions of generated model. The system presents the operator a recommendation degree map which illustrates recommendation position of acquisition of range data in the objective area. The operator decides a next acquisition position in consideration of movement distance of sensor system and recommendation degrees of the map. The recommendation degree is computed by measurement density as the index. The recommendation degree at a position is given by the difference between measurement density acquired by rangefinder and measurement density estimated by the system in reachable area of the laser beams. The reachable area of the laser beams is estimated by using a 3D model generated from the acquired range data. The system computes the measurement density by the reachable area of the laser beams. The recommendation degrees in the objective area are computed by the model generated from range data whenever a range data is acquired. Moreover, the system judges whether overlapping portions of the range data can be acquired for the registration by ICP algorithm from a work area which the sensor system can enter.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Toshihiro Asai, Toshihiro Asai, Masayuki Kanbara, Masayuki Kanbara, Naokazu Yokoya, Naokazu Yokoya, "Data acquiring support system using recommendation degree map for 3D outdoor modeling", Proc. SPIE 6491, Videometrics IX, 64910H (29 January 2007); doi: 10.1117/12.704292; https://doi.org/10.1117/12.704292
PROCEEDINGS
8 PAGES


SHARE
Back to Top