Analysis of patient bed positioning in SPECT-CT imaging for dedicated mammotomography

Kristy L. Perez; Priti Madhav; Dominic J. Crotty; Martin P. Tornai

doi:10.1117/12.713822

14 March 2007 Analysis of patient bed positioning in SPECT-CT imaging for dedicated mammotomography

Kristy L. Perez, Priti Madhav, Dominic J. Crotty, Martin P. Tornai

Proceedings Volume 6510, Medical Imaging 2007: Physics of Medical Imaging; 651037 (2007) https://doi.org/10.1117/12.713822
Event: Medical Imaging, 2007, San Diego, CA, United States

Abstract

Patient positioning on a bed is an integral part of accurate imaging for dedicated 3D breast imaging. For both dedicated breast SPECT (single photon emission computed tomography) and breast CT (computed tomography or computed mammotomography, CmT) which are under development in our lab, maximum access to the breast in the imaging system's field of view is required to obtain the largest imaged breast volume. Accurate bed positioning will be necessary as it may be integrated with a guided biopsy apparatus. Thus, a patient bed with flexible 3D positioning capability is being integrated into the various independent and hybrid 3D imaging systems. The customized bed has both manual and computer controlled positioning capability, and the accuracy and reproducibility of the system are being characterized. Computer controlled positioning and feedback provide seemingly reproducible results. However, gross movements may vary in their accuracy to the given input position. While linear with slopes near 1.0 and intercepts near 0.0cm, lateral (Y) movement translates less than the input amount, while axial (X) movement translates farther than the input amount. Vertical (Z) directional movement follows a quadratic shift with a small dc component with or without added weight on the table. A variety of patient imaging conditions along with x-ray image data are evaluated to demonstrate the reproducibility of positioning accuracy. Individual directional repositioning accuracy is found to be better than multiple, combined directional repositioning accuracy. Imaging results indicate a reproducibility (error) of less than 1mm, which may be suitable for SPECT imaging but perhaps not for higher resolution dedicated breast CT. However, for the independent SPECT system, bed motion is not necessary because the detector's line of sight can already acquire data at the chest wall.

Citation Download Citation

Kristy L. Perez, Priti Madhav, Dominic J. Crotty, and Martin P. Tornai "Analysis of patient bed positioning in SPECT-CT imaging for dedicated mammotomography", Proc. SPIE 6510, Medical Imaging 2007: Physics of Medical Imaging, 651037 (14 March 2007); https://doi.org/10.1117/12.713822

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available