Paper
5 April 2007 Characterization of capacitive 3D deep trench mask open structures using scatterometry
Author Affiliations +
Abstract
A non-destructive and fast optical solution for characterization of 3D deep trench mask open structures containing two holes per unit cell is presented. It is discussed that measurement sensitivity depends on wafer orientation. A weighted reference measurement system using data from scatterometry combined with CD-SEM and CD-AFM techniques after HF removal of the top BSG layer demonstrates adequate performance of scatterometry for high aspect ratio 3D process control implementations. For example the BCD major and minor axis scatterometry total measurement uncertainty values are about a factor 2 better than the corresponding results obtained using CD-SEM and CD-AFM. While scatterometry data exhibit close to unity slope for both TCD and BCD, corresponding CD-SEM and CD-AFM performances show significantly stronger dependence on depth. Hence, Scatterometry sensitivity to CD variation is less depth sensitive which is a preferred high volume manufacturing property.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Shahin Zangooie, Pedro Herrera, Abebe Mesfin, Chas Archie, and Matthew Sendelbach "Characterization of capacitive 3D deep trench mask open structures using scatterometry", Proc. SPIE 6518, Metrology, Inspection, and Process Control for Microlithography XXI, 651827 (5 April 2007); https://doi.org/10.1117/12.712763
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication and 3 patents.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Scatterometry

Silicon

Metrology

Semiconducting wafers

Critical dimension metrology

3D metrology

Photomasks

Back to Top