Pushing the boundary: low-k1 extension by polarized illumination

Eelco van Setten; Wim de Boeij; Birgitt Hepp; Nicolas le Masson; Geert Swinkels; Mark van de Kerkhof

doi:10.1117/12.713873

26 March 2007 Pushing the boundary: low-k1 extension by polarized illumination

Eelco van Setten, Wim de Boeij, Birgitt Hepp, Nicolas le Masson, Geert Swinkels, Mark van de Kerkhof

Proceedings Volume 6520, Optical Microlithography XX; 65200C (2007) https://doi.org/10.1117/12.713873
Event: SPIE Advanced Lithography, 2007, San Jose, California, United States

Abstract

The introduction of polarized illumination has enabled the extension of low-k1 processes well below a k1-factor of 0.3. Previously, it has been demonstrated by simulations and early exposure results that properly polarized illumination leads to an increase of contrast and exposure latitude, resulting in reduced MEEF and better CD control. The gain of polarization is most pronounced in the hyper-NA regime of high-end immersion tools (NA > 1.0), but also 'dry' high- NA scanners (NA = 0.93) benefit significantly from polarized illumination. For volume production, polarized illumination must be fully compatible with all requirements for a lithographic step and scan system: full throughput, overlay and focus control, flexibility and ease-of-use are essential features. This is realized by employing polarization-conserving optics, and by automated in-line metrology to optimize and control the system for any selected polarization state. In this paper, experimental results will be shown demonstrating the gain of using polarized illumination on high- and hyper-NA exposure tools, of both dry and immersion types. The various imaging relevant parameters (MEEF, EL, DOF, LWR) will be addressed in relation to the use of polarization exposure conditions. The effect of polarization control on imaging performance will be presented in relation to CD control at low k1. Finally, the viability to extend the k1-value to 0.28 for a bi-directional process and 0.27 for a uni-directional process when using polarized illumination will be demonstrated.

Citation Download Citation

Eelco van Setten, Wim de Boeij, Birgitt Hepp, Nicolas le Masson, Geert Swinkels, and Mark van de Kerkhof "Pushing the boundary: low-k1 extension by polarized illumination", Proc. SPIE 6520, Optical Microlithography XX, 65200C (26 March 2007); https://doi.org/10.1117/12.713873

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available