11 April 2007 Concentration effect of the Au-pattern on a cellulose paper using &mgr;-contact printing technique
Author Affiliations +
The electro-active paper (EAPap) has been investigated as a light-weight and low power consuming actuator. The EAPap cannot be utilized conventional lithography technique for fabrication of metal pattern due to its hydrophilic and flexible properties. A metal pattern fabrication on the EAPap is a beginning step for the integration of the paper actuators and micro-electronics. To overcome the drawback of the EAPap, a micro-contact printing (μ-CP) technique was utilized to fabricate Au-patterns on EAPap. Large number of cracks or nanograins was observed on the transferred Au-pattern. These defects were closely related with the solvent polarity during the fabrication of adhesion self-assembly monolayer (SAM). To investigate the cause of defects, three different solvents having different polarity were utilized during the SAM layer fabrication process. The ethanol having high polarity was utilized to investigate the effect of the 3- mercaptopropyltrimethoxysilane (MPTMS) concentration on micro or nano-defect formation.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
H. K. Lim, H. K. Lim, K. Y. Cho, K. Y. Cho, Jaehwan Kim, Jaehwan Kim, K. S. Kang, K. S. Kang, } "Concentration effect of the Au-pattern on a cellulose paper using &mgr;-contact printing technique", Proc. SPIE 6528, Nanosensors, Microsensors, and Biosensors and Systems 2007, 65280F (11 April 2007); doi: 10.1117/12.715871; https://doi.org/10.1117/12.715871


Back to Top