11 April 2007 High-speed microfluidic thermal stimulator for temperature-activated ion channel studies
Author Affiliations +
Abstract
In this paper we have designed and built a microfluidic thermal chip that provides rapid temperature changes in the solution combined with accurate temperature control. The thermal chip was designed to facilitate the patch-clamp to study temperature dependent activities of ion channels. The device consists of a fluid channel for perfusing solution connected to an accessible reservoir for making patch-clamp measurements on individual cells. A thin film platinum heater was used to generate rapid temperature change and the temperature was monitored using a thin film resistor. The thermal chip was constructed using SU-8 materials on glass wafer to minimize the heat loss to the substrate and channel walls. The chip was characterized for various flow rates ranging from 0.0093 mL/min to 0.0507 mL/min with heater power ranging from 2.7 to 19.4 mW. The heating element is capable of alternating the temperature ranging from bath temperature (20°C) to 90°C at maximum heating rate of 1°C/10 ms. Using the chip, patch clamp recordings were made on cultured HEK cells as the temperature was rapidly varied. The results demonstrated that the thermal chip could be used as a thermal clamp for many thermosensitive ion channel studies.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Thomas Pennell, Jianbin Wang, Susan Z. Hua, "High-speed microfluidic thermal stimulator for temperature-activated ion channel studies", Proc. SPIE 6528, Nanosensors, Microsensors, and Biosensors and Systems 2007, 65280N (11 April 2007); doi: 10.1117/12.714443; https://doi.org/10.1117/12.714443
PROCEEDINGS
8 PAGES


SHARE
Back to Top