10 April 2007 Ultrasonic 3D imaging system for the automated application in milling machines
Author Affiliations +
Abstract
In order to meet the requirements of rising flexibility and an automated material inspection in a small batch production environment, an automatically changeable ultrasound sensor tool for milling machines has been developed. This system enables an automated ultrasonic inspection of varying parts to be carried out directly on a machining center and visualizes hidden geometries and material imperfections three-dimensionally. The sensor tool is based on commercialized ultrasonic squirter-probes, which are able to use the cooling lubricant for sound coupling. During the measurement recordings, the milling machine's axes move the sensor numerical-controlled across the workpiece. By this means, automated material inspection tasks can be performed very cost-effectively without setting up separate testing facilities. 4- or 5-axes kinematics capacitates the system to check even very complex-shaped parts.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Robert Schmitt, Robert Schmitt, Philip Hafner, Philip Hafner, } "Ultrasonic 3D imaging system for the automated application in milling machines", Proc. SPIE 6530, Sensor Systems and Networks: Phenomena, Technology, and Applications for NDE and Health Monitoring 2007, 653009 (10 April 2007); doi: 10.1117/12.713988; https://doi.org/10.1117/12.713988
PROCEEDINGS
8 PAGES


SHARE
Back to Top