3 May 2007 Status report on EUV source development and EUV source applications in EUVL
Author Affiliations +
Proceedings Volume 6533, 23rd European Mask and Lithography Conference; 653315 (2007) https://doi.org/10.1117/12.737183
Event: European Mask and Lithography Conference2007, 2007, Grenoble, France
Extreme ultraviolet lithography (EUVL) is the leading technology for patterning at the 32 nm technology node and be-yond. EUVL light at 13.5 nm is used to print circuits. This light is produced by heating fuel (Xe, Sn) in EUV sources to a very high temperature by using either magnetic compression or laser irradiation. Today EUV source power remains the number one concern for implementation of EUVL in high volume manufacturing. Over the last few years, much pro-gress has been made in EUV source performance and availability. Today, alpha level high power (~10 W) EUV sources have been integrated in alpha level EUVL scanners. Medium and low power EUV sources are used for in-house metrol-ogy and performance studies on EUV mask blanks, EUV masks, photoresists, and optical elements. These compact dis-charge sources with medium power in the range of 10-100 mW/sr/2% bandwidth and low power EUV tubes are being used by various R&D labs for development of mask, optics, and resists. Previously, development of EUVL was mostly located at beamlines; today, these low power EUV sources are instrumental in allowing in-house R&D projects. In this paper, the latest status of high power EUV sources, low and medium power metrology sources, and some of their appli-cations are described.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Vivek Bakshi, Vivek Bakshi, Rainer Lebert, Rainer Lebert, Bernhard Jägle, Bernhard Jägle, Christian Wies, Christian Wies, Uwe Stamm, Uwe Stamm, Juergen Kleinschmidt, Juergen Kleinschmidt, Guido Schriever, Guido Schriever, Christian Ziener, Christian Ziener, Marc Corthout, Marc Corthout, Joseph Pankert, Joseph Pankert, Klaus Bergmann, Klaus Bergmann, Willi Neff, Willi Neff, André Egbert, André Egbert, Deborah Gustafson, Deborah Gustafson, } "Status report on EUV source development and EUV source applications in EUVL", Proc. SPIE 6533, 23rd European Mask and Lithography Conference, 653315 (3 May 2007); doi: 10.1117/12.737183; https://doi.org/10.1117/12.737183


High-radiance LDP source for mask inspection application
Proceedings of SPIE (April 16 2014)
Physical properties of the HCT EUV source
Proceedings of SPIE (June 15 2003)
EUVL system: moving towards production
Proceedings of SPIE (March 17 2009)
Discharge produced plasma source for EUV lithography
Proceedings of SPIE (April 11 2007)
Xenon DPP source technologies for EUVL exposure tools
Proceedings of SPIE (March 17 2009)

Back to Top