14 May 2007 Short-wave infrared radiometers design and characterizations
Author Affiliations +
Proceedings Volume 6542, Infrared Technology and Applications XXXIII; 65420O (2007); doi: 10.1117/12.720548
Event: Defense and Security Symposium, 2007, Orlando, Florida, United States
Abstract
Short-wave infrared (SW-IR) radiometers have been developed to extend the NIST reference responsivity scales from the silicon wavelength range to 2500 nm. In addition to spectral power responsivity measurements, where 5 mm diameter extended-InGaAs (EIGA) detectors are underfilled by the incident radiation, irradiance responsivity calibrations are needed. Irradiance measuring radiometers are used as reference detectors to calibrate field radiometers in both irradiance and radiance measurement modes. In irradiance mode, smaller detectors with high shunt resistance, such as 1 mm diameter short-wave HgCdTe and EIGA detectors are used. Mechanical, optical, thermal, and electronic design considerations of SW-IR radiometers are discussed. Noise equivalent currents (NEC) were measured to evaluate noise equivalent power (NEP) and D*.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
George P. Eppeldauer, Howard W. Yoon, "Short-wave infrared radiometers design and characterizations", Proc. SPIE 6542, Infrared Technology and Applications XXXIII, 65420O (14 May 2007); doi: 10.1117/12.720548; https://doi.org/10.1117/12.720548
PROCEEDINGS
10 PAGES


SHARE
KEYWORDS
Sensors

Radiometry

Resistance

Silicon

Calibration

Head

Resistors

RELATED CONTENT


Back to Top