14 May 2007 A validation procedure for a LADAR system radiometric simulation model
Author Affiliations +
Abstract
The USU LadarSIM software package is a ladar system engineering tool that has recently been enhanced to include the modeling of the radiometry of Ladar beam footprints. This paper will discuss our validation of the radiometric model and present a practical approach to future validation work. In order to validate complicated and interrelated factors affecting radiometry, a systematic approach had to be developed. Data for known parameters were first gathered then unknown parameters of the system were determined from simulation test scenarios. This was done in a way to isolate as many unknown variables as possible, then build on the previously obtained results. First, the appropriate voltage threshold levels of the discrimination electronics were set by analyzing the number of false alarms seen in actual data sets. With this threshold set, the system noise was then adjusted to achieve the appropriate number of dropouts. Once a suitable noise level was found, the range errors of the simulated and actual data sets were compared and studied. Predicted errors in range measurements were analyzed using two methods: first by examining the range error of a surface with known reflectivity and second by examining the range errors for specific detectors with known responsivities. This provided insight into the discrimination method and receiver electronics used in the actual system.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Brad Leishman, Brad Leishman, Scott Budge, Scott Budge, Robert Pack, Robert Pack, } "A validation procedure for a LADAR system radiometric simulation model", Proc. SPIE 6550, Laser Radar Technology and Applications XII, 65500G (14 May 2007); doi: 10.1117/12.720240; https://doi.org/10.1117/12.720240
PROCEEDINGS
9 PAGES


SHARE
RELATED CONTENT


Back to Top