16 May 2007 Feasibility study of an embedded multi-axial fibre Bragg grating sensor
Author Affiliations +
Abstract
This paper discusses a new sensor design based on optical fibre Bragg gratings which is being developed in the framework of the MASSFOS-project ('Multi-Axial Stress and Strain sensing of thermo hardened composite elements using Fibre Optic Sensors'-project). The objective of this ESA co-funded project is to develop a monitoring system which measures dynamically the multi-axial stress and strain plus temperature in thermo hardened composite elements. The sensor consists of a 'High Birefringence'-fibre in which two gratings have been inscribed; each grating yields two distinct Bragg peaks. The first grating is sensitive to the total stress field in the material, while the second one is isolated from transverse stress components. By measuring the four Bragg peaks of the sensor, it is theoretically possible to determine the total strain field, plus the temperature inside a composite material. Static experiments (a tensile test and a compressive test) have already been carried out to prove the feasibility of the sensor embedded in a composite laminate.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
G. Luyckx, G. Luyckx, W. De Waele, W. De Waele, J. Degrieck, J. Degrieck, W. Van Paepegem, W. Van Paepegem, J. Vlekken, J. Vlekken, T. Verbeke, T. Verbeke, } "Feasibility study of an embedded multi-axial fibre Bragg grating sensor", Proc. SPIE 6585, Optical Sensing Technology and Applications, 65850E (16 May 2007); doi: 10.1117/12.722863; https://doi.org/10.1117/12.722863
PROCEEDINGS
10 PAGES


SHARE
Back to Top