23 January 2007 A silica optical fiber with an expanding conical end
Author Affiliations +
Proceedings Volume 6594, Lasers for Measurements and Information Transfer 2006; 65940S (2007) https://doi.org/10.1117/12.725619
Event: Lasers for Measurements and Information Transfer 2006, 2006, St. Petersburg, Russian Federation
Abstract
Propagation of meridional beams in conical optical fibers (tapers) is considered. An equation is obtained that relates the beam parameters at the input and the output of a taper. This equation is valid for any physically admissible values of the taper angle β. Based on the equation obtained, the aperture properties of dielectric tapers are analyzed. Explicit formulas and their asymptotics as β -> 0 are obtained for the input and output apertures of these tapers. A laboratory technology is worked out for thawing tapers from cylindrical preforms for multimode optical fibers with silica core and silica-doped fluorine cladding. A family of such tapers with the following geometric parameters is drawn: the smaller diameter of a taper d = 0.2 - 1.0 mm, the ratio of the larger diameter to the smaller one (taper ratio) D/d = 1.0 - 5.0, and the taper length H = 30 - 150 cm.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Aleksander A. Makovetskii, Aleksander A. Makovetskii, Aleksander A. Zamyatin, Aleksander A. Zamyatin, } "A silica optical fiber with an expanding conical end", Proc. SPIE 6594, Lasers for Measurements and Information Transfer 2006, 65940S (23 January 2007); doi: 10.1117/12.725619; https://doi.org/10.1117/12.725619
PROCEEDINGS
11 PAGES


SHARE
RELATED CONTENT

Advantages Of Using Thin Fibers
Proceedings of SPIE (June 21 1988)
Optical Fiber Power Delivery System
Proceedings of SPIE (February 04 1987)
1.3 µm Edge Emitting LEDs for optical communication
Proceedings of SPIE (July 16 1986)
Radiation Induced Loss In Undoped And F-Doped Silica
Proceedings of SPIE (April 26 1989)

Back to Top