10 April 2007 Observations of crystalline structures occurring in the tape obtained with the melt-spinning method from the alloy with elastic memory Ti50Ni25Cu25
Author Affiliations +
Proceedings Volume 6597, Nanodesign, Technology, and Computer Simulations; 65970R (2007) https://doi.org/10.1117/12.726772
Event: Nanodesign, Technology, and Computer Simulations, 2006, Olsztyn, Poland
Abstract
In the article the results of diffractometric, calorimetric research as well as the chemical constitution have been presented. The research was carried out on the samples made of a thin amorphous tape made with the melt-spinning method from the alloy revealing the memory Ti50Ni25Cu25 effect. The samples were subjected to annealing at different parameters of holding in temperature. After the heat treatment, the response of martensite transformation and formed crystal structures has been observed. The X-ray microstructural tests showed forming so-called outer (top) "free" layer of lamellar precipitation of the high level of coherence.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Teodor Breczko, Teodor Breczko, Janusz Szczepanek, Janusz Szczepanek, } "Observations of crystalline structures occurring in the tape obtained with the melt-spinning method from the alloy with elastic memory Ti50Ni25Cu25", Proc. SPIE 6597, Nanodesign, Technology, and Computer Simulations, 65970R (10 April 2007); doi: 10.1117/12.726772; https://doi.org/10.1117/12.726772
PROCEEDINGS
4 PAGES


SHARE
Back to Top