10 April 2007 Plastic deformation at the top of a stopped crack
Author Affiliations +
Proceedings Volume 6597, Nanodesign, Technology, and Computer Simulations; 65970U (2007); doi: 10.1117/12.726780
Event: Nanodesign, Technology, and Computer Simulations, 2006, Olsztyn, Poland
Abstract
The plastic zone was represented by a line or a set of lines of sliding to planes, disposed to the plane of the crack under angle of π/4. Two stages of formation dislocation structure at the top of the crack were studied. Firstly, the formation of sliding lines at the top of a stopped crack was studied, when the crystal was loaded. Second, their evolution was investigated after the loading had been taken away. On second stage, the part of dislocations leaves on the plane of a crack under action of forces of mutual pushing and the image, the part of convertible plasticity can reach half from the total number of dislocations.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yu. I. Tyalin, V. A. Tyalina, D. V. Zolotova, A. A. Butyagin, "Plastic deformation at the top of a stopped crack", Proc. SPIE 6597, Nanodesign, Technology, and Computer Simulations, 65970U (10 April 2007); doi: 10.1117/12.726780; https://doi.org/10.1117/12.726780
PROCEEDINGS
3 PAGES


SHARE
KEYWORDS
Crystals

Mathematical modeling

Data modeling

Laser induced fluorescence

Resistance

Astatine

Microscopy

Back to Top