Estimation of shot counts in VSB writer using GDSII design data

Shogo Narukawa; Hiroshi Mohri; Naoya Hayashi; Yoshikazu Nagamura; Kunihiro Hosono

doi:10.1117/12.729009

15 May 2007 Estimation of shot counts in VSB writer using GDSII design data

Shogo Narukawa, Hiroshi Mohri, Naoya Hayashi, Yoshikazu Nagamura, Kunihiro Hosono

Proceedings Volume 6607, Photomask and Next-Generation Lithography Mask Technology XIV; 66072Q (2007) https://doi.org/10.1117/12.729009
Event: Photomask and Next-Generation Lithography Mask Technology XIV, 2007, Yokohama, Japan

Abstract

Photomask pattern writer requires high-speed data processing that is conducted concurrently with the variable shaped beam (VSB) writing. As input electron beam (EB) mask data, trapezoid data format is generally used for EB writing because of the easier handling than polygon data format. Recent years, volume of photomask pattern data is growing as the increase of pattern density that is caused by additional various subsidiary patterns of optical proximity correction (OPC). OPC in design rules of 65nm and below is getting approximately 1.5 times more complex than that in the former generation, which increases the photomask pattern data volume approximately 3 times larger. VSB writing time is accurately estimated by counting the total number of "shots" which are primitive figures generated in the data processing of EB writer from the trapezoid patterns in EB mask data. However, no feedback and layout modification can be taken to LSI designs and OPC, even though problems regarding mask manufacturability such as explosion of EB writing time is recognized after starting EB writing process. We developed a simulator that estimates the number of "shots" in VSB EB writing by original shot division method using design data GDSII instead of EB mask data. This simulator outputs total counts and density map of shots of EB writing in photomask layout as well as chip layout in a short time using multi-processing. We can use this software as a core function in our Mask-DFM solutions offering to LSI designers and CAD engineers in order to estimate mask manufacturability before they finish mask data tape-out, and this work can reduce cost and improve TAT in mask manufacturing.

Citation Download Citation

Shogo Narukawa, Hiroshi Mohri, Naoya Hayashi, Yoshikazu Nagamura, and Kunihiro Hosono "Estimation of shot counts in VSB writer using GDSII design data", Proc. SPIE 6607, Photomask and Next-Generation Lithography Mask Technology XIV, 66072Q (15 May 2007); https://doi.org/10.1117/12.729009

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available