16 July 2007 Cordless hand-held optical 3D sensor
Author Affiliations +
Proceedings Volume 6618, O3A: Optics for Arts, Architecture, and Archaeology; 66180D (2007); doi: 10.1117/12.726121
Event: Optical Metrology, 2007, Munich, Germany
Abstract
A new mobile optical 3D measurement system using phase correlation based fringe projection technique will be presented. The sensor consist of a digital projection unit and two cameras in a stereo arrangement, whereby both are battery powered. The data transfer to a base station will be done via WLAN. This gives the possibility to use the system in complicate, remote measurement situations, which are typical in archaeology and architecture. In the measurement procedure the sensor will be hand-held by the user, illuminating the object with a sequence of less than 10 fringe patterns, within a time below 200 ms. This short sequence duration was achieved by a new approach, which combines the epipolar constraint with robust phase correlation utilizing a pre-calibrated sensor head, containing two cameras and a digital fringe projector. Furthermore, the system can be utilized to acquire the all around shape of objects by using the phasogrammetric approach with virtual land marks introduced by the authors1, 2. This way no matching procedures or markers are necessary for the registration of multiple views, which makes the system very flexible in accomplishing different measurement tasks. The realized measurement field is approx. 100 mm up to 400 mm in diameter. The mobile character makes the measurement system useful for a wide range of applications in arts, architecture, archaeology and criminology, which will be shown in the paper.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Christoph Munkelt, Christian Bräuer-Burchardt, Peter Kühmstedt, Ingo Schmidt, Gunther Notni, "Cordless hand-held optical 3D sensor", Proc. SPIE 6618, O3A: Optics for Arts, Architecture, and Archaeology, 66180D (16 July 2007); doi: 10.1117/12.726121; https://doi.org/10.1117/12.726121
PROCEEDINGS
6 PAGES


SHARE
KEYWORDS
Sensors

Cameras

3D metrology

Head

Projection systems

Image sensors

3D scanning

Back to Top