A method for simplifying phase-height mapping in phase measurement profilometry

Yong Li; Xianyu Su; Haihua Zhang

doi:10.1117/12.791419

5 March 2008 A method for simplifying phase-height mapping in phase measurement profilometry

Yong Li, Xianyu Su, Haihua Zhang

Proceedings Volume 6623, International Symposium on Photoelectronic Detection and Imaging 2007: Image Processing; 66230S (2008) https://doi.org/10.1117/12.791419
Event: International Symposium on Photoelectronic Detection and Imaging: Technology and Applications 2007, 2007, Beijing, China

Abstract

Phase-height mapping algorithm is the key technology of phase measurement profilometry (PMP). Because of lens distortion of the projector, phase-height mapping is not simple linear transform and the mapping procedure become complex. A method is introduced to simplify phase-height mapping. The detail of this method is expressed as following: (1) Two suits of sinusoidal gratings which are perpendicular to each other are projected to the calibration target respectively. (2) The position of each target mark in calibration target is estimated using standard image processing technique. (3) Distortion coefficients of projector are estimated from the phase of target marks and their positions, according to the camera model. (4) Ideal phase distribution for projecting is designed. (5) According to the camera distortion model, distorting and transforming the ideal phase distribution, distorted phase distribution in the image plane is acquired. Then the phase-shifting sinusoidal fringes with distorted phase are generated. The anamorphic sinusoidal fringes are distorted inversely during projecting because projecting process is the reverse process of imaging. Therefore, the ideal sinusoidal fringes are projected. The phase-height mapping of PMP system can be ideally expressed and the mapping procedure is simplified. A practical PMP measurement system was constructed and the distortion coefficients are estimated by calibrating the system. They are k1=-6.989×10^-2 and p₁=5.957×10^-3. Then the distorted sinusoidal fringes are generated and projected for calibrating. Distortion coefficients are estimated again. They are k₁=-7.882×10^-3 and p₁=-3.777×10^-3. It is found from the experimental results that the distortion of projector is reduced a lot after grating correction.

Citation Download Citation

Yong Li, Xianyu Su, and Haihua Zhang "A method for simplifying phase-height mapping in phase measurement profilometry", Proc. SPIE 6623, International Symposium on Photoelectronic Detection and Imaging 2007: Image Processing, 66230S (5 March 2008); https://doi.org/10.1117/12.791419

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
7 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Distortion

Projection systems

Calibration

Cameras

Fringe analysis

Phase measurement

Target acquisition

Show All Keywords

Keywords/Phrases

Search In:

Publication Years