19 February 2008 Research on the measuring system for crankshaft based on laser principle
Author Affiliations +
Proceedings Volume 6625, International Symposium on Photoelectronic Detection and Imaging 2007: Related Technologies and Applications; 662521 (2008) https://doi.org/10.1117/12.791239
Event: International Symposium on Photoelectronic Detection and Imaging: Technology and Applications 2007, 2007, Beijing, China
Abstract
This measuring machine is specially designed to solve many parameters of crankshaft for some factory. According to the laser slot scanning principle, non-contact measuring of two axes' parallel degree for crankshaft is realized. The machine use laser technique, photoelectric measuring technique, fine mechanical technique, modern photoelectric sensor technique, electronics technique and computer-technique. And the difficulty which include complex shape, large weight, large size, high request of the measured parameter precision and difficult measuring, is solved.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Weiguo Cao, Changxi Xue, Xuemei Bai, Lijuan Li, Zhiyong An, "Research on the measuring system for crankshaft based on laser principle", Proc. SPIE 6625, International Symposium on Photoelectronic Detection and Imaging 2007: Related Technologies and Applications, 662521 (19 February 2008); doi: 10.1117/12.791239; https://doi.org/10.1117/12.791239
PROCEEDINGS
6 PAGES


SHARE
RELATED CONTENT

RabbitQR fast and flexible big data processing at LSST...
Proceedings of SPIE (August 08 2016)
The command and data processing unit of the Euclid Visible...
Proceedings of SPIE (September 21 2012)
Noncontact precision measurement system
Proceedings of SPIE (November 01 1990)
New autofocusing system for laser micromachining
Proceedings of SPIE (August 27 2003)
Advanced Video Guidance Sensor (AVGS) project summary
Proceedings of SPIE (September 01 2004)
Diode-pumped imaging laser radar
Proceedings of SPIE (September 08 1999)

Back to Top