Translator Disclaimer
8 May 2007 Preparation and characterization of indium tin oxide films by sol-gel method
Author Affiliations +
Proceedings Volume 6635, Advanced Topics in Optoelectronics, Microelectronics, and Nanotechnologies III; 663510 (2007) https://doi.org/10.1117/12.742078
Event: Advanced Topics in Optoelectronics, Microelectronics, and Nanotechnologies III, 2006, Bucharest, Romania
Abstract
Sol-gel technology is a relatively simple and cheap process to deposit oxides under thin film form out of a sol. The experiments were developed in order to obtain nanomaterials by sol-gel method; nanomaterials that mixed with resin and additives can be deposited in thin and uniform films by spraying on different lignocellulosic composite surfaces. This method assures a functional finishing of the nanomaterials. These films are transparent and the surfaces are flat with no cracks. The influence of substrate type, morphology of the films and of the substrates before and after deposition was studied by means of optical microscopy, scanning electron microscopy (SEM) and atomic force microscopy (AFM). The sol-gel deposit on the lignocellulosic composite substrates lowered the sorption rates of water and water vapours.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Alina Ciuciumis and Ileana Cernica "Preparation and characterization of indium tin oxide films by sol-gel method", Proc. SPIE 6635, Advanced Topics in Optoelectronics, Microelectronics, and Nanotechnologies III, 663510 (8 May 2007); https://doi.org/10.1117/12.742078
PROCEEDINGS
6 PAGES


SHARE
Advertisement
Advertisement
Back to Top