22 September 2007 Design and fabrication of gold nanostructures with nanosphere lithography for LSPR applications
Author Affiliations +
Abstract
This paper reports the details regarding the design and fabrication of gold nanostructures on glass substrates through nanosphere lithography (NSL) for the application of localized surface plasmon resonance (LSPR), which can be used for biosensors. It is realized through gold film deposition on nanospheres dispersed on a surface and subsequent anisotropic etching. Depending on the gold deposition and etching conditions, a variety of gold nanostructure shapes can be obtained. So far through this method, only 2D nanocrescents are reported. In this paper it is pointed out that both 2D and 3D non-conformal nanostructures can be fabricated, and some 2D and 3D profiles of the obtainable nanostructures are simulated by our programs under various deposition and etching conditions. The fabrication processes of the nanostructures on glass substrates are also reported, and the simulated profiles of such nanostructures coincide well with the experimental results. These results prove that our profile simulation program can realize the design of 2D and 3D nanostructures obtainable by nanosphere lithography, and reduce the effort and cost for achieving optimized nanostructures by experiments in the trial and error stage.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Xiaodong Zhou, Xiaodong Zhou, Wolfgang Knoll, Wolfgang Knoll, Sharon Su Yin Oh, Sharon Su Yin Oh, Selven Virasawmy, Selven Virasawmy, Li Wei Yen, Li Wei Yen, Nan Zhang, Nan Zhang, } "Design and fabrication of gold nanostructures with nanosphere lithography for LSPR applications", Proc. SPIE 6641, Plasmonics: Metallic Nanostructures and Their Optical Properties V, 66411U (22 September 2007); doi: 10.1117/12.732312; https://doi.org/10.1117/12.732312
PROCEEDINGS
10 PAGES


SHARE
Back to Top