Paper
28 September 2007 Low half-wave voltage modulators using nonlinear optical polymers
Danliang Jin, Diyun Huang, Baoquan Chen, Hui Chen, Lixin Zheng, Anna Barklund, Guomin Yu, Eric Miller, Merly Moolayil, Bing Li, Raluca Dinu
Author Affiliations +
Abstract
The optical and material properties of AJ309 electro-optic (EO) polymer were systematically studied with the objective to fabricate an optimized integrated device. Both bottom and top cladding materials were developed at Lumera to match the processibility of AJ309, and sustain high poling voltage needed for an effective poling process. A device fabrication process is developed. The degree of crosslinking of the EO polymer before poling is minimized by processing the top clad polymer at room-temperature. The UV-curable top clad has shown no detectable chemical damage to the EO polymer after the deposition process of the top clad, thus maintaining the integrity of the interface between top clad and AJ309 core. A 2.1 cm long active length Mach-Zehnder modulator with low half-wave voltage (Vπ) of 1.1 V @1550 nm was fabricated using the AJ309 EO polymer and in-house cladding materials. Other device parameters are also reported.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Danliang Jin, Diyun Huang, Baoquan Chen, Hui Chen, Lixin Zheng, Anna Barklund, Guomin Yu, Eric Miller, Merly Moolayil, Bing Li, and Raluca Dinu "Low half-wave voltage modulators using nonlinear optical polymers", Proc. SPIE 6653, Linear and Nonlinear Optics of Organic Materials VII, 66530Q (28 September 2007); https://doi.org/10.1117/12.731814
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Polymers

Cladding

Modulators

Electrodes

Brain-machine interfaces

Chromophores

Refractive index

RELATED CONTENT


Back to Top