12 September 2007 Development of a MWIR polarimetric FPA
Author Affiliations +
Abstract
Past work with polarimetry in the mid-wave infrared (MWIR) has yielded mixed results. In order to better characterize polarimetric content in the MWIR and short-wave infrared (SWIR) atmospheric windows, we are developing focal plane array (FPA) technology that will address shortcomings in earlier devices. In particular, our efforts are focusing on placing micro-polarizing grids in very close proximity to the P-N junction of the detector. By placing these micropolarizers very close to the photodetector junction, the opportunity for polarimetric cross talk between pixels is minimized. CE's unique process for fabricating FPAs is well suited for implementing this approach. Since a polarimetric FPA consisting of a standard FPA and micro-wire grid polarizers reduces the effective FPA format by a factor of two in both dimensions, the ability to produce extremely large format FPAs are critical to obtain high resolution polarimetric imagery. CE's FPA fabrication process is also highly scalable and has successfully fabricated FPAs as large as 2k by 2k. This paper describes the progress we've made towards developing these unique polarimetric FPAs.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
David P. Forrai, Darrel W. Endres, John W. Devitt, Andrew M. Sarangan, Qiwen Zhan, Aziz Mahfoud-Familia, Robert T. Mack, James S. Harris, "Development of a MWIR polarimetric FPA", Proc. SPIE 6660, Infrared Systems and Photoelectronic Technology II, 666007 (12 September 2007); doi: 10.1117/12.737777; https://doi.org/10.1117/12.737777
PROCEEDINGS
10 PAGES


SHARE
RELATED CONTENT

Evolution of EO/IR technology and systems
Proceedings of SPIE (September 19 2013)
Toward very large format infrared detector arrays
Proceedings of SPIE (January 09 2008)
Development of megapixel dual-band QWIP focal plane array
Proceedings of SPIE (April 23 2008)
Thermal Imaging System For Material Processing
Proceedings of SPIE (September 22 1987)

Back to Top