Design and analysis of the composite spider structure within the Kepler Schmidt Telescope

M. J. Hegge; R. G. Wendland; C. D. Miller

doi:10.1117/12.727917

26 September 2007 Design and analysis of the composite spider structure within the Kepler Schmidt Telescope

M. J. Hegge, R. G. Wendland, C. D. Miller

Proceedings Volume 6665, New Developments in Optomechanics; 666505 (2007) https://doi.org/10.1117/12.727917
Event: Optical Engineering + Applications, 2007, San Diego, California, United States

Abstract

NASA's planned Kepler mission uses a space-born Schmidt telescope to search for Earth-size and smaller planets around distant stars using differential photometry. This paper reports the successful design, analysis and implementation of suspending a large actively cooled (-90C) focal plane array with associated electronics inside the warm (0C) Kepler photometer. Since a Schmidt Telescope requires the focal plane to be in the middle of the telescope, it must be suspended while obscuring only a small portion of the incoming light. The Kepler focal plane is comprised of 21 individual science CCD modules and 4 guidance sensor modules covering an area that is roughly 1200 square centimeters in a telescope with a 0.95m aperture. The Kepler system requires the detector data to be digitized near the focal plane, so a detector electronics box is also suspended behind the CCD array. A total of 65 kilograms is supported by the spider structure inside the telescope and must remain stable through environments and during on-orbit operations. Key to the performance of the system is a stiff, light-weight composite structure that supports the focal plane and electronics above the primary mirror. This spider structure is used to align the focal plane with respect to the primary mirror in the system, and is intentionally over-constrained after alignment. Techniques used to align the focal plane to the optical system are discussed and predicted alignment performance and stability are reported.

Citation Download Citation

M. J. Hegge, R. G. Wendland, and C. D. Miller "Design and analysis of the composite spider structure within the Kepler Schmidt Telescope", Proc. SPIE 6665, New Developments in Optomechanics, 666505 (26 September 2007); https://doi.org/10.1117/12.727917

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
8 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Telescopes

Composites

Planets

Stars

Space telescopes

Charge-coupled devices

Staring arrays

Show All Keywords

Keywords/Phrases

Search In:

Publication Years