Translator Disclaimer
14 September 2007 Automated transfer of optical tolerances from CAD programs to optical codes
Author Affiliations +
Abstract
There have been many techniques developed for transferring data from CAD programs to optical codes. These data include geometry data as well as deformation data due to environmental stresses. But little has been done to transfer the opto-mechanical tolerances from the CAD programs to the optical codes, especially the probability distribution functions for the tolerances. This paper discusses the issues involved with such data transfer and describes an example transfer methodology from Sigmetrix's CETOL program to CODE V from Optical Research Associates. The required steps to perform the data transfer will be described, and an example is shown.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Michael S. Boren and Richard C. Juergens "Automated transfer of optical tolerances from CAD programs to optical codes", Proc. SPIE 6668, Novel Optical Systems Design and Optimization X, 666803 (14 September 2007); https://doi.org/10.1117/12.729781
PROCEEDINGS
11 PAGES


SHARE
Advertisement
Advertisement
Back to Top