Translator Disclaimer
9 August 2007 The system of laser sintering process monitoring and adaptive control
Author Affiliations +
Proceedings Volume 6731, International Conference on Lasers, Applications, and Technologies 2007: Advanced Lasers and Systems; 673125 (2007) https://doi.org/10.1117/12.752872
Event: International Conference on Lasers, Applications, and Technologies '07, 2007, Minsk, Belarus
Abstract
To control the process parameter settings and to visually inspect the process quality, a monitoring system for the sintering process was designed. The monitoring of the sintering process is based on measurements of the maximum surface temperature and the temperature distribution at the sintering zone by the spectral ratio method. Software and hardware for adaptive process control of powder solids SLS were developed.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yu. Chivel, A. Inyutin, M. Vatkin, A. Uzunbadgakov, and D. Zatiagin "The system of laser sintering process monitoring and adaptive control", Proc. SPIE 6731, International Conference on Lasers, Applications, and Technologies 2007: Advanced Lasers and Systems, 673125 (9 August 2007); https://doi.org/10.1117/12.752872
PROCEEDINGS
6 PAGES


SHARE
Advertisement
Advertisement
Back to Top