Paper
26 September 2007 Novel intensity-modulated temperature-independent FBG sensors
Author Affiliations +
Proceedings Volume 6757, Sensors for Harsh Environments III; 675702 (2007) https://doi.org/10.1117/12.733850
Event: Optics East, 2007, Boston, MA, United States
Abstract
Intensity-modulated fiber-optic sensors have many advantages including simplicity and potential low cost. The developments of several intensity-modulated fiber Bragg grating (FBG) sensor systems are introduced in this paper. These include a displacement sensor, a tilt sensor (both based on chirped FBGs), and a dual-FBG based sensor which can measure lots of parameters such as strain. For the chirped FBG based sensors, the measurands are related to reflection optical powers of the sensing FBGs by changing their chirp rates (or reflection bandwidths) which are insensitive to temperature. While the dual-FBG based sensor is based on electrical beating of modulated radio-frequency (RF) signals reflected from the two FBGs, which act as the sensing element and reference respectively. The power of the RF beating signal depends on the wavelength separation of the two FBGs. By monitoring the RF signal power, intensity-modulated FBG sensing with the sensitivity depending on the modulation frequency of the light source is realized while the temperature effect is compensated by the reference FBG. Experimental measurement of strain, displacement and tilt angle are implemented and good results are achieved.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Xinyong Dong, H. Y. Tam, and P. Shum "Novel intensity-modulated temperature-independent FBG sensors", Proc. SPIE 6757, Sensors for Harsh Environments III, 675702 (26 September 2007); https://doi.org/10.1117/12.733850
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber Bragg gratings

Sensors

Modulation

Light sources

Reflectivity

Temperature metrology

Photodetectors

Back to Top