21 November 2007 Low PMD transmission fibers and cables
Author Affiliations +
Proceedings Volume 6781, Passive Components and Fiber-based Devices IV; 67811U (2007) https://doi.org/10.1117/12.745256
Event: Asia-Pacific Optical Communications, 2007, Wuhan, China
Abstract
Polarization mode dispersion may be the optical impediment that prevents future system upgrades to higher transmission speeds or longer reach. In contrast to chromatic dispersion, PMD is a statistical quantity making it extremely difficult and expensive to compensate. Thus fibers with low PMD where no such compensation is needed is therefore of great interest. This paper discusses the levels of PMD that can be tolerated at future transmission speeds and relate these to the current ITU-T recommendations. The focus of this paper is the issues that have to be considered in order to manufacture fibers and cables with sufficiently low PMD levels. This includes process control, fiber spinning, and proper measurement of the PMD. A correct PMD measurement makes it possible to judge whether a specific step in the process introduces or changes PMD. We show that the proper process control and PMD measurements have facilitated production and installation of large volume of cables with PMD low enough to support future upgrades.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
T. Geisler, T. Geisler, } "Low PMD transmission fibers and cables", Proc. SPIE 6781, Passive Components and Fiber-based Devices IV, 67811U (21 November 2007); doi: 10.1117/12.745256; https://doi.org/10.1117/12.745256
PROCEEDINGS
12 PAGES


SHARE
Back to Top