19 November 2007 Birefringent hollow core fibers
Author Affiliations +
Proceedings Volume 6782, Optoelectronic Materials and Devices II; 67821R (2007) https://doi.org/10.1117/12.754405
Event: Asia-Pacific Optical Communications, 2007, Wuhan, China
Abstract
Hollow core photonic crystal fiber (HC-PCF), fabricated according to a nominally non-birefringent design, shows a degree of un-controlled birefringence or polarization mode dispersion far in excess of conventional non polarization maintaining fibers. This can degrade the output pulse in many applications, and places emphasis on the development of polarization maintaining (PM) HC-PCF. The polarization cross-coupling characteristics of PM HC-PCF are very different from those of conventional PM fibers. The former fibers have the advantage of suffering far less from stressfield fluctuations, but the disadvantage of a higher loss figure and the presence of interface roughness induced modecoupling which increases in strength as birefringence reduces. Close to mode anti-crossing events of one polarization mode, the PM HC-PCF is characterized by high birefringence, a high polarization dependent loss and an increased overlap between the polarization modes at the glass interfaces. The interplay between these effects leads to a wavelength for optimum polarization maintenance, λPM, which is detuned from the wavelength of highest birefringence. By a suitable fiber design involving antiresonance of the core-surround geometry, λPM may coincide with a low-loss wavelength for the signal carrying polarization mode.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
P. J. Roberts, "Birefringent hollow core fibers", Proc. SPIE 6782, Optoelectronic Materials and Devices II, 67821R (19 November 2007); doi: 10.1117/12.754405; https://doi.org/10.1117/12.754405
PROCEEDINGS
11 PAGES


SHARE
Back to Top