29 February 2008 Time-multiplexing display module for high-density directional display
Author Affiliations +
Abstract
The new high-density directional (HDD) display using the time-multiplexing technique is proposed to reduce the complexity of the multi-projection system used for the HDD display. The HDD display is a natural three-dimensional display which has been developed to solve the visual fatigue problem caused by the accommodation-vergence conflict. The proposed HDD display consists of multiple time-multiplexing display modules. Each module consists of an LED array, a DMD, lenses, and an aperture array. A number of directional images are displayed by the DMD at a high frame rate and the LED's emit light one after another in synchronization with the DMD. The apertures are arranged twodimensionally, and their horizontal positions are different. The LED's are arranged in a same way. All directional images displayed by the DMD pass through different apertures. Multiple modules are arranged two-dimensionally with the different horizontal positions and all images are combined by a common lens. A vertical diffuser is used as a display screen to cancel the difference of the vertical display directions. All directional images are superimposed on the vertical diffuser, and are given the different horizontal display directions. Each module generates 15 directional images at a frame rate of 60 Hz. Four modules are combined to display 60 directional images in the different horizontal directions with the angle pitch of 0.31°.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Tsubasa Kanebako, Tsubasa Kanebako, Yasuhiro Takaki, Yasuhiro Takaki, } "Time-multiplexing display module for high-density directional display", Proc. SPIE 6803, Stereoscopic Displays and Applications XIX, 68030P (29 February 2008); doi: 10.1117/12.767881; https://doi.org/10.1117/12.767881
PROCEEDINGS
8 PAGES


SHARE
RELATED CONTENT


Back to Top