8 January 2008 One dimension dynamic ablation of bovine shank bone with pulse CO2 laser
Author Affiliations +
Abstract
The goal of this study was an in vitro evaluation of one dimension dynamic ablation of hard bone tissue with pulse CO2 laser. The tissue model was bovine shank bone which was put on a PC-controlled motorized linear drive stage and move repeatedly through the focused beam. Pulse CO2 laser wavelength 10.6μm was focused down to a spot size of 510μm on the tissue sample surface. radiant exposure ranged from 5J/cm2 to 45J/cm2, repetition rates was 60Hz. After irradiation, the groove morphology produced by laser ablation were examined by optical coherent tomography (OCT) and light microscope following standard histological processing. Quantitative measurement of geometry and thermal damage of ablation groove was presented. It was shown that the width and depth of ablation groove and the zone of collateral thermal damage created in hard bone sample increased steadily with laser fluence. The results suggest that pulse CO2 laser can be a suitable candidate to cut hard bone tissue, and laser radiant exposure has an important effect on ablation rate and collateral thermal damage.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Xianzeng Zhang, Xianzeng Zhang, Shusen Xie, Shusen Xie, Zhenlin Zhan, Zhenlin Zhan, Qing Ye, Qing Ye, } "One dimension dynamic ablation of bovine shank bone with pulse CO2 laser", Proc. SPIE 6826, Optics in Health Care and Biomedical Optics III, 68260I (8 January 2008); doi: 10.1117/12.756842; https://doi.org/10.1117/12.756842
PROCEEDINGS
8 PAGES


SHARE
RELATED CONTENT

CO2 laser milling of hard tissue
Proceedings of SPIE (February 05 2007)
Novel oral laser applications
Proceedings of SPIE (April 24 2007)

Back to Top