Analysis and design of suspension wire in the optical pickup actuator

Bu Q. Zhang; Jian S. Ma; Xue M. Cheng; Long F. Pan; Lan Y. Wu

doi:10.1117/12.754915

21 November 2007 Analysis and design of suspension wire in the optical pickup actuator

Bu Q. Zhang, Jian S. Ma, Xue M. Cheng, Long F. Pan, Lan Y. Wu

Proceedings Volume 6827, Quantum Optics, Optical Data Storage, and Advanced Microlithography; 682719 (2007) https://doi.org/10.1117/12.754915
Event: Photonics Asia 2007, 2007, Beijing, China

Abstract

The lens actuator is the important mechanical-electrical component in the optical disk reading/recording system. According to the error signals from the optical pickup reading/writing process, namely the focusing and tracking error signals, the focusing coils as well as the tracking coils are applied the corresponding corrective current (or voltage), thus, the force generated by the current-on coils in the magnetic field will real-time actuate the objective lens to make the focusing spot precisely fall on the disc information track, realizing the data reading/writing. As wire suspension type, the suspension model determines the wire design process. According to the material mechanics, the force distribution on the wires is analyzed and the four wire suspension model is set up, thus, the wire parameters are designated and the natural frequency as well as the static sensitivity of the moving part can be determined. After serial material experiments using Instron 5848 Microtester, better treatment for the wire fabrication is adopted with 1.5 hour aging and sliver cover-layer. Moreover, the actuator with the suspension wire is tested by the laser vibrometer and results show the good performance of the actuator, which proves the feasibility of the suspension model. Although the suspension model is set up on the four wire suspension actuator used in DVD-ROM, it can also be used in the six wire suspension actuator in the HD DVD and Blu-Ray.

Citation Download Citation

Bu Q. Zhang, Jian S. Ma, Xue M. Cheng, Long F. Pan, and Lan Y. Wu "Analysis and design of suspension wire in the optical pickup actuator", Proc. SPIE 6827, Quantum Optics, Optical Data Storage, and Advanced Microlithography, 682719 (21 November 2007); https://doi.org/10.1117/12.754915

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available