24 January 2008 Development of new optical fiber toluene sensor
Author Affiliations +
Abstract
This paper deals with experimental results on detection of toluene dispersed in water by means of a new and simple plastic optical fiber (POF) sensor. Its sensing part consists of swelling polymer cladding layer such as high density polyethylene (HDPE) with slightly larger refractive index n2 than that of poly(methyl methacrylate) (PMMA) core with n1. When is exposed to toluene dispersed in water, HDPE cladding layer causes swelling and the value of n2 decreases quickly. Then the POF structure in the sensing part changes from leaky-type to guided-one and the output light intensity increases dramatically. By measuring this light intensity change, it becomes possible to detect toluene concentration. In addition, as compared with the popular evanescent-wave detection principle type, this sensor operation does not depend on the wavelength of light source. Therefore, we can use an inexpensive LED or LD in visible region. In experiment, detection of less than 1 wt% toluene in water was easily obtained with fast response about only 1 s. Furthermore, this sensor can detect pure toluene even for a small amount below 1 ml.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yasunari Fujii, Yasunari Fujii, Satoshi Honma, Satoshi Honma, Masayuki Morisawa, Masayuki Morisawa, Shinzo Muto, Shinzo Muto, } "Development of new optical fiber toluene sensor", Proc. SPIE 6829, Advanced Materials and Devices for Sensing and Imaging III, 68291Z (24 January 2008); doi: 10.1117/12.758019; https://doi.org/10.1117/12.758019
PROCEEDINGS
8 PAGES


SHARE
Back to Top