Paper
26 November 2007 Ring fiber-optic sensor systems
Qi-ren Zhuang, Jiaxian Wang, Shuang Meng, Bin Lei, Jian-wen Lin
Author Affiliations +
Abstract
A resonant fiber-optic sensor using a general ring fiber is proposed. A frequency sweep sinusoidal intensity modulated laser beam is injection locked to the ring fiber sensor using a fiber coupler of low coupling coefficient. The ring fiber is a resonant ring as well as an extracted carrier. In respect that the resonant ring of difference length has difference resonant frequency, the systems operating in the length range 0.6-2 meters and resonant frequency range 100-300MHz, frequency division multiplexing has been used in these sensor systems. Demodulation was achieved by using frequency tracking demodulator that uniform amplify signals in large bandwidth and a narrow band filter in it, so that it has a high signal to noise rate(SNR). According to the experiments with a general ring fiber, the method is very easy and inexpensive to implement, demodulation linearity over 1 decades and minimum relative variation detection ∼0.1% attained. The ring fiber sensors have certain advantages that include high sensitivity, large bandwidth, and ease in implementing multiplexed or distributed sensors. Strain, temperature and pressure are the most appropriate measurands in the systems.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Qi-ren Zhuang, Jiaxian Wang, Shuang Meng, Bin Lei, and Jian-wen Lin "Ring fiber-optic sensor systems", Proc. SPIE 6830, Advanced Sensor Systems and Applications III, 683016 (26 November 2007); https://doi.org/10.1117/12.754942
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber optics sensors

Sensors

Modulation

Signal detection

Demodulation

Fiber couplers

Electronic filtering

Back to Top