4 January 2008 Properties of ITO thin films prepared by APS-assisted EB evaporation
Author Affiliations +
Proceedings Volume 6831, Nanophotonics, Nanostructure, and Nanometrology II; 683111 (2008); doi: 10.1117/12.754513
Event: Photonics Asia 2007, 2007, Beijing, China
Abstract
ITO thin films were prepared by oxygen ion-assisted electron beam (EB) evaporation technique onto K9 glass substrate at low temperature and effects of substrate temperature, oxygen flux on the structure, electrical and optical properties of ITO thin films were investigated. An advanced plasma source (APS) was used to produce high density argon and oxygen ion flux to cause electron degeneracy in the band gap by introducing non-stoichiometry in the ITO films to improve the conductivity of the prepared films. The structure of the ITO thin films were characterized by XRD and the results shown that all of the ITO films deposited at the temperature above 160°C shown a polycrystalline structure. And as the substrate temperature increased, the optical transmittance and electrical conductivity were improved. It is also found that the increase of oxygen flux increased the optical transmittance of the deposited ITO films, however, at a given deposition rate, the electrical conductivity showed a maximum in a certain range of oxygen flux. ITO thin films with the resistivity of 1.65×10-4 Ω· cm and an optical transmittance of above 90% in the visible region were prepared at a temperature of 250°C by the given method.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Guangzong He, Changxin Xiong, Xilin Yao, "Properties of ITO thin films prepared by APS-assisted EB evaporation", Proc. SPIE 6831, Nanophotonics, Nanostructure, and Nanometrology II, 683111 (4 January 2008); doi: 10.1117/12.754513; https://doi.org/10.1117/12.754513
PROCEEDINGS
5 PAGES


SHARE
KEYWORDS
Oxygen

Thin films

Transmittance

Plasma

Ions

Temperature metrology

Optical properties

Back to Top