Translator Disclaimer
4 January 2008 Fabrication for micro circular gratings and arrays based on binary optical methods with DMD system
Author Affiliations +
Using DMD system to make circular gratings and arrays is based on the character of Space Light Modulation (SLM) of DMD chip which can control the reflected lights based on the input figures' gray-scale. Firstly, circular gratings are simulated in a computer with some simulation software programmed in VC. Then, the figures are inputted in the DMD chip. With the character of SLM of DMD chip, the reflected lights can be controlled according to the circular gratings' gray-scale. The circular gratings can be obtained after being developed, fixed and etched. Many contrast experiments are carried out to confirm the technique parameters of circular gratings, as well as fabricate the two levels, four levels and array of circular grating. By use of this method, we are capable of making low-cost but useful circular gratings easily. Their levels and radii can be controlled, which will be suited for many optical systems. Compared with scoring mechanically, lithography and e-beam etching, binary optical methods are more convenient, efficient and low-cost.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Xingdao He, Kaiyuan Lu, and Yongqing Gong "Fabrication for micro circular gratings and arrays based on binary optical methods with DMD system", Proc. SPIE 6832, Holography and Diffractive Optics III, 68322J (4 January 2008);


Photomask development for 90-nm technology
Proceedings of SPIE (January 27 2005)
Study of mask structure for 45 nm node based on...
Proceedings of SPIE (May 14 2007)
Multiresolution mask writing
Proceedings of SPIE (April 01 2011)

Back to Top