29 November 2007 Study on defect detection of IC wafer based on morphology
Author Affiliations +
With the development of the micro-processing, silicon material technique, the silicon structural design, mass production, the scientific researches on integrated circuit have been developed rapidly. Defect detection and fault diagnosis as critical design requirements is necessary to achieve high-quality, cost-effective multichip systems. An increasingly difficult task, however, is the inherent need to accurately locate, indentify the defects within the microchip. A method of defect detection of IC wafer have been investigated using mathematical morphology. Firstly, the differential charts of the pending images and the intact image of IC wafer are computed and digitized to two gray levels, i.e. black and white. Secondly, the brightness of the pending images have been transformed to the same brightness as that of intact image in order to make the arithmetics is robust for various illumination conditions. Next, the defects on the binary image of differential chart can be found and dealt with mathematical morphology. Finally, several representative characteristics are proposed to extract and describe the defects of IC wafer image, for example perimeter, area, macro axis, minor axis, eccentricity ratio, centroid, circularity and rectangular degree, etc.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Alin Hou, Alin Hou, Wen Zhou, Wen Zhou, Guangming Cui, Guangming Cui, Dongcheng Shi, Dongcheng Shi, Kun Xu, Kun Xu, Lihong Zhang, Lihong Zhang, Jie Liu, Jie Liu, } "Study on defect detection of IC wafer based on morphology", Proc. SPIE 6833, Electronic Imaging and Multimedia Technology V, 683334 (29 November 2007); doi: 10.1117/12.759560; https://doi.org/10.1117/12.759560


Morphological technique for clutter suppression in ATR
Proceedings of SPIE (September 17 1998)
Object extraction method for image synthesis
Proceedings of SPIE (October 31 1991)
Reconstructable one-pass parallel thinning
Proceedings of SPIE (May 18 1992)
Use of color in integrated-circuit inspection
Proceedings of SPIE (July 31 1990)

Back to Top