28 November 2007 The optimal design of TIR lens for improving LED illumination uniformity and efficiency
Author Affiliations +
Abstract
With the development of LED technology, LED will potentially replace the traditional light source for its cost and size advantages, especially in the micro-projection system. And since the illumination uniformity and efficiency on spatial light modulators (SLM) are two important factors in evaluating the performance of micro-projection system, tapered light pipe (TLP) and square compound parabolic concentrator (SCPC) are often used as beam shaper in LED-based micro projection system to provide SLM with uniform and efficient illumination. In this paper, in order to overcome the disadvantage of insufficient compactness induced by the working length of TLP or SCPC for the illumination system, a total internal reflection (TIR) lens with rotated and faceted structure is designed with an optimization method to couple and transfer most of the light emitted from LED into a rectangular target plane (RTP) representing SLM. The TIR lens has six surfaces controlled by 17 dimensional parameters and is designed by optimization of dimensional parameters with generic algorithms. In order to provide RTP in fixed position with satisfied illumination uniformity and efficiency, the illumination uniformity and efficiency on RTP are taken into account in the merit function for the optimization process. In Tracepro program, the simulation result of the LED illumination system with the optimized TIR lens shows that the illumination efficiency and uniformity has respectively achieved to 61.9%, 76% with considering the limitation angle of light (15°).
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yankun Zhen, Yankun Zhen, Zhenan Jia, Zhenan Jia, Wenzi Zhang, Wenzi Zhang, } "The optimal design of TIR lens for improving LED illumination uniformity and efficiency", Proc. SPIE 6834, Optical Design and Testing III, 68342K (28 November 2007); doi: 10.1117/12.756101; https://doi.org/10.1117/12.756101
PROCEEDINGS
8 PAGES


SHARE
RELATED CONTENT

A novel optimization strategy for LED street lamp designing
Proceedings of SPIE (December 31 2013)
Design of collimating system for LED source
Proceedings of SPIE (December 31 2013)
Method for design of axis symmetrical TIR optics with use...
Proceedings of SPIE (December 18 2012)
Beam reshaping for rectangular area illumination
Proceedings of SPIE (May 22 2007)
Optimal design of a nonimaging TIR doublet lens for an...
Proceedings of SPIE (September 29 2004)

Back to Top