8 January 2008 A novel optical approach based on speckle effect produced by VCSEL for tracking on glass surface
Author Affiliations +
Abstract
The paper presents a novel optical approach to realize tracking on glass based on speckle effect produced by vertical-cavity surface-emitting laser (VCSEL). The range of incident angle has been investigated which shows incident angle in the range of 75 to 90 degrees is favorable to acquire a pure speckle field with purity better than 90%. In the system, nearly grazing angle of incidence 85 degrees is introduced, and big operating current of VCSEL and high gain of CCD are adopted to ensure signal detected. We analyze the cause of background contained in the image and remove them by placing a barrier between the laser diode and charge coupled device (CCD) and an infrared filter in front of CCD. After above-mentioned improvement of the system, a good linear dependence between displacement of speckle images and amount of glass translation is proved by experiment and the slope of the fitted line agrees well with theoretical predictions, the accuracy of tracking system is better than 4%.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Wei Huang, Wei Huang, Huaqiao Gui, Huaqiao Gui, Liang Lv, Liang Lv, Jing Xu, Jing Xu, Fugui Yang, Fugui Yang, Hongbo Wang, Hongbo Wang, Jianping Xie, Jianping Xie, Hai Ming, Hai Ming, } "A novel optical approach based on speckle effect produced by VCSEL for tracking on glass surface", Proc. SPIE 6838, Optoelectronic Devices and Integration II, 683816 (8 January 2008); doi: 10.1117/12.754826; https://doi.org/10.1117/12.754826
PROCEEDINGS
7 PAGES


SHARE
Back to Top