Paper
8 January 2008 Single mode condition of polymeric Y-junction rib waveguide
Author Affiliations +
Abstract
Single mode propagation is an important requirement for optical waveguide devices for use with single-mode fiber, it can reduce the coupling loss. In this paper, a technique is used for calculating the field distribution of the polymeric Y-junction rib waveguide. The technique is based on the combination of the effective index method(EIM) and the variational method(VM). It is mixed between the advantages of each method and avoided their disadvantages, where EIM can make the calculations procedures simple but it has some difficult to find the field distribution, other wise, VM can be used with very good accuracy to find the field distribution. An algorithm is implemented to study the effect of the structure parameters on the field distribution of the polymeric Y-junction rib waveguide. In our simulation, the core layer is PU-FTC (n=1.65@1.3μm),the cladding layers were NOA73 (n=1.54@1.3μm) and Epoxylite9653 (n=1.54@1.3μm). The obtained single mode rid waveguide structure parameters are: the core thickness is 1.5μm, the rib height is 0.2μm, the rib width is 5μm.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Rongguo Lu, Jinkun Liao, Yongzhi Liu, Yong Liu, and Qianshu Zhang "Single mode condition of polymeric Y-junction rib waveguide", Proc. SPIE 6838, Optoelectronic Devices and Integration II, 68381N (8 January 2008); https://doi.org/10.1117/12.755736
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Waveguides

Polymers

Polymer multimode waveguides

Single mode fibers

Cladding

Photorefractive polymers

Electro optic polymers

Back to Top