Paper
4 January 2008 Thermal analysis of high power GaN-based light emitting diode
Debo Guo, Libin Wang, Zhiqiang Liu, Meng Liang, Manning Fan, Guohong Wang, Liangchen Wang, Jinmin Li
Author Affiliations +
Abstract
In this paper we present thermal analysis of three different-structured high power LEDs. The thermal resistance of different-structured LEDs was determined. The results indicated that the thermal resistance severely depended on the number of bumps for flip-chip LEDs. One could get lower thermal resistance for flip-chip LEDs than that for conventional and vertical LEDs by selecting appropriate number of bumps in theory. But considering the practical process of LEDs' fabrication, the conventional LEDs because of the simple making process showed more stable and lower thermal resistance. There existed the same problems as flip-chip LEDs' for vertical LEDs. Maybe electroplate copper was the effective way to get good thermal characteristic.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Debo Guo, Libin Wang, Zhiqiang Liu, Meng Liang, Manning Fan, Guohong Wang, Liangchen Wang, and Jinmin Li "Thermal analysis of high power GaN-based light emitting diode", Proc. SPIE 6841, Solid State Lighting and Solar Energy Technologies, 68410Z (4 January 2008); https://doi.org/10.1117/12.760019
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Light emitting diodes

Resistance

Thermal analysis

Copper

Gallium nitride

Thermography

Fluctuations and noise

Back to Top