Photosensitive etch protection coating for silicon wet-etch applications

J. Dalvi-Malhotra; X. F. Zhong; C. Planje

doi:10.1117/12.778246

18 February 2008 Photosensitive etch protection coating for silicon wet-etch applications

J. Dalvi-Malhotra, X. F. Zhong, C. Planje

Proceedings Volume 6884, Reliability, Packaging, Testing, and Characterization of MEMS/MOEMS VII; 68840J (2008) https://doi.org/10.1117/12.778246
Event: MOEMS-MEMS 2008 Micro and Nanofabrication, 2008, San Jose, California, United States

Abstract

A spin-on polymeric material has been developed to replace the silicon nitride mask used in the MEMS industry for silicon wet-etch processing. Built-in photosensitivity eliminates the need for additional photoresists in the system. The process consists of applying an organosilane-based primer layer onto a silicon wafer, followed by spin coating the photosensitive layer. After a soft bake, the coating is imaged by exposing it to ultraviolet light. After a post-exposure bake, the coating is developed by a solvent. After a final bake, the prepared wafer is then etched in a hot concentrated alkaline solution to complete the pattern transfer. The polymer-coated area remains protected with insignificant and controllable undercut after extended hours of wet etching. Etch protection performance was characterized as a ratio of undercut (u) to etch depth (h). The polymeric mask allows silicon substrates to be etched anisotropically in the same way as silicon nitride masks although more undercut occurs when KOH or NaOH are used as etchants. With use of tetramethylammonium hydroxide (TMAH) as an etchant, a consistent 1-2% undercut ratio (u/h×100%) was obtained. The effects of various parameters such as use of different etchants and the effects of etchant concentration and delayed processing on undercut ratio are investigated.

Citation Download Citation

J. Dalvi-Malhotra, X. F. Zhong, and C. Planje "Photosensitive etch protection coating for silicon wet-etch applications", Proc. SPIE 6884, Reliability, Packaging, Testing, and Characterization of MEMS/MOEMS VII, 68840J (18 February 2008); https://doi.org/10.1117/12.778246

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
8 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Etching

Semiconducting wafers

Coating

Silicon

Photomasks

Polymers

Wet etching

Show All Keywords

Keywords/Phrases

Search In:

Publication Years